MANUAL

Paper-like film

Paste manual

アートボード 71_3x-100.jpg

アートボード 72_3x-100.jpg

Gently wipe the screen with the included wet wipe and cloth.

The dust removal sticker removes petapeta and dust. Dust can cause air bubbles, so remove it carefully.

With the adhesive side down, peel off only the transparent protective sheet on the back side by about 5 cm.

Check the position of the tablet and film and paste.

Using the card, while pushing out the air, peeling off the transparent protective sheet, slowly bond it.

Use the card to push out the remaining air bubbles. Protective sheet Blue does not matter if it gets scratched.

Pinch the peel-off sticker and peel off the blue protective sheet.

Use a cloth to push out the remaining air bubbles.

Lift the edge of the film with cellophane tape, etc.
Re-paste while pushing out the air with a card or finger.

アートボード 29-100.jpg

When air bubbles do not come out

Remove the dust on the suction surface with a dust removal sticker.

アートボード 30-100.jpg

When dust is mixed

Glass film for tablets

Glass film for smartphones

Guided film for smartphones

Film for Apple Watch