top of page

MANUAL

Paper-like film

Paste manual

フィルムの剥がし方

1

Gently wipe the screen with the included wet wipe and cloth.

2

The dust removal sticker removes petapeta and dust. Dust can cause air bubbles, so remove it carefully.

3

With the adhesive side down, peel off only the transparent protective sheet on the back side by about 5 cm.

4

Check the position of the tablet and film and paste.

5

Using the card, while pushing out the air, peeling off the transparent protective sheet, slowly bond it.

6

Use the card to push out the remaining air bubbles. Protective sheet Blue does not matter if it gets scratched.

7

Pinch the peel-off sticker and peel off the blue protective sheet.

8

Use a cloth to push out the remaining air bubbles.

Lift the edge of the film with cellophane tape, etc.
Re-paste while pushing out the air with a card or finger.

アートボード 29-100.jpg

When air bubbles do not come out

Remove the dust on the suction surface with a dust removal sticker.

アートボード 30-100.jpg

When dust is mixed

bottom of page